The LWP-DOC wall pack was specifically designed to be a vandal resistant alternative when an added level of durability is required. With a die-cast aluminum housing, impact-resistant polycarbonate lens and vandal-resistant screws this fixture is the ideal solution for building facades, general security, storage areas and entry door applications.
LWS-DOC-25 – 25W, 2,368 Delivered Lumens
• Die-cast aluminum housing with textured architectural bronze powder coat finish over a chromate conversion coating.
• Impact-resistant polycarbonate lens and front enclosure.
• Cast-in template for mounting directly over 4” recessed outlet box, or use ½” surface conduit
• CSA Listed to UL 1598 / 8750 and CSA 22.2 No. 250 for Wet Locations
• Meets Buy American requirements within the ARRA
• Industry leading 10 year L70 performance based warranty
Lumecon prides itself on selecting the highest quality components to build its line of LED products. This precise selection process is why all of the Lumecon products and fixture options are covered under a 10 year L70 All-Parts Warranty. Full compliance and test documentation is available for TM-21, LM-79, LM-80, ETL Listing to UL1598 and UL8750, Lighting Facts, and DLC.
LUMECON ETD™ SYSTEM
The Lumecon High Output LED Light engine utilizes the Lumecon ETD™ (Enhanced Thermal Dissipation) System. The ETD System Engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards and UL and IPC standards for flammability, moisture resistance and thermal shock.
LED LIGHT COLOR / QUALITY
The High Output LEDs come standard in 4,000k Neutral White, with additional options of 2,700k Warm White and 5,000k Cool White on the Kelvin temperature scale.
All are rated for a minimum of 100,000 hours of continuous operation at select ambient temperature ranges. Contact your Lumecon sales agent for product specific specifications.
20kA SURGE PROTECTION
A 20kA surge suppressor is included to provide an additional level of protection against power line disturbances in industrial and commercial applications. Thermally protected 20kA/ 40kV varistor type surge suppressor is included and meets IEEE/ANSI C62.41.2 guidelines for “C High exposure.” Also meets IEC61643-11 Class II / EN61643-11 Type 2, and US Dept of Energy MSSLC Model Spec for surge protection. The device is wired in series with the luminaire input power in order to interrupt power to the luminaire when consumed, protecting the LED power supply and circuit boards from additional electrical surges.
Building Accent Lighting
Accent lighting is critical for setting the mood when designing a building, or a place. Recognizing ...
Aesthetics and security are at the forefront of campus lighting decisio...
Entrance Door Lighting
Aesthetics and security are at the forefront of entrance illumination decisions. Recognizing this is...