LUMECON DETROIT SERIES

The story of Lumecon’s Detroit Series is heavily influenced by the cars and trucks Detroit has been producing for the past 100 years. The sleek lines of the design are reminiscent of the muscle cars and pick-ups giving the look a Motor City feel. The LDS offers a bold Detroit inspired design that performs efficiently and reliably against a rugged outdoor environment.

Proudly inspired, designed, engineered, assembled and shipped right here in the USA, with the most US content possible.

The Lumecon Detroit Series Features:

Lumecon ETD™ System
The enhanced thermal dissipation system engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards, UL, and IPC standards for flammability, moisture resistance and thermal shock.

Extreme Surge Protection
Thermally protected 20kA / 40kV varistor type surge suppressor is included and meets ANSI C136.2-2015: Extreme Level. Also meets IEC61643-11 Class II / EN61643-11 Type 2, and US Dept of Energy MSSLC Model Spec for surge protection. The device is wired in series with the luminaire input power in order to interrupt power to the luminaire when consumed, protecting the LED power supply and circuit boards from additional electrical surges.

Color Temperature
2700K, 3000K, 4000K (standard), 5000K

Color Rendering Index (CRI)
A minimum of 70 or higher. CRI 80 or 90+ available upon request.

Dimming
0-10V standard dimming capability.

Occupancy Sensor (Optional)
Passive infrared technology rated for -40°F to 130°F. Available in on/off and dim/high functionality.

Luminaire Vibration Testing
Passed ANSI C136.31 Vibration testing for both “Normal” and “Bridge/Overpass” acceleration applications, simulating wind- and traffic-induced vibrations. The testing utilized the predetermined resonant frequency of the fixture, and was tested to 100,000 cycles in all 3 axes to a peak acceleration level of 3G.

Certification Data
ETL Listed to UL 1598, UL 8750 and CSA 22.2 No. 250 for Wet Locations. *Full compliance and test documentation is available for TM-21, LM-79, LM-80, ETL Listing to UL1598 and UL 8750.

DesignLights Consortium® (DLC) Qualified Product
Unless noted, not all versions of this product may be DLC® qualified. For a complete list of Lumecon DLC® Qualified Products visit: www.designlights.org.

Warranty
10 Year L70 performance based warranty.