The LDS-SFL small flood light is the first of its kind in Lumecon’s LED Detroit Series. Combining a sleek fixture design with energy efficient performance allows this fixture to be used in parking lots, roadways, pathways and general area lighting applications replacing existing fixtures up to 400W HID one-for-one.
• Die-cast aluminum housing with powder coat chromate coating
• Flat tempered clear glass lens
• Standard two-piece swivel bracket mounting attachment
• ETL Listed to UL 1598 / 8750 and for Wet Locations
• Industry Leading 10 year L70 performance based warranty
Lumecon prides itself on selecting the highest quality components to build its line of LED products. This precise selection process is why all of the Lumecon products and fixture options are covered under a 10 year L70 All-Parts Warranty. Full compliance and test documentation is available for TM-21, LM-79, LM-80, CSA Listed to UL 1598 / 8750 and CSA 22.2 No. 250 for Wet Locations.
LUMECON ETD™ SYSTEM
The Lumecon High Output LED Light engine utilizes the Lumecon ETD™ (Enhanced Thermal Dissipation) System. The ETD System Engines are thermally bonded to provide maximum thermal dissipation to the exterior of the fixture to ensure long life. To protect the light engine panel from moisture and corrosion, the LED light engine panel is uniformly coated with a UV stabilized acrylic polymer resin that meets MIL and ASTM dielectric standards and UL and IPC standards for flammability, moisture resistance and thermal shock.
LED LIGHT COLOR / QUALITY
The High Output LEDs come standard in 4,000k, with additional options of 2,200k, 2,700k, 3,000k and 5,000k on the Kelvin temperature scale.
All LED’s are rated for a minimum of 100,000 hours of continuous operation at ambient temperatures from -40°F/-40°C to 95°F/35°C.
20kA / 40kV SURGE PROTECTION
A 20kA / 40kV surge suppressor is included to provide an additional level of protection against power line disturbances in industrial and commercial applications. Thermally protected 20kA / 40kV varistor type surge suppressor is included and meets ANSI C136.2-2015: Extreme Level. Also meets IEC61643-11 Class II / EN61643-11 Type 2, and US Dept of Energy MSSLC Model Spec for surge protection. The device is wired in series with the luminaire input power in order to interrupt power to the luminaire when consumed, protecting the LED power supply and circuit boards from additional electrical surges.
LDS Sell Sheet
LDS-SFL-30-DB-NR-1-40 IES Files
LDS-SFL-30-DB-ST-1-40 IES Files
LDS-SFL-45-DB-NR-1-40 IES Files
LDS-SFL-45-DB-ST-1-40 IES Files
LDS-SFL-60-DB-NR-1-40 IES Files
LDS-SFL-60-DB-ST-1-40 IES Files
LDS-SFL-80-NR-NW IES File
LDS-SFL-80-DB-NR-1-40 IES Files
LDS-SFL-80-DB-ST-1-40 IES Files
LDS-SFL-110-NR-NW IES File
LDS-SFL-110-DB-NR-1-40 IES Files
LDS-SFL-110-DB-ST-1-40 IES Files
LDS-SFL-125-NR-NW IES File
LDS-SFL-125-DB-NR-1-40 IES Files
LDS-SFL-125-DB-ST-1-40 IES Files
LDS-SFL-160-DB-NR-1-40 IES Files
LDS-SFL-160-DB-ST-1-40 IES Files
Lumecon 10 Year Warranty
Lumecon Terms & Conditions
Aesthetics and security are at the forefront of campus lighting decisio...
Flag Pole Lighting
With flag pole lighting, it is crucial to direct light to where it is needed most (the flag). With t...
General Area Lighting
Lighting has always played an important role in the safety and security of our public places. By uti...